Cleaning the 80-liter water dispenser is very important for healthy water consumption and long life of the device. Regular cleaning of the dispenser prevents the formation of bacteria, mold, lime and bad odors. Below are the steps you can follow for cleaning the water dispenser:
1. Turn Off the Dispenser and Drain the Water
Disconnect the Power: Before starting to clean, disconnect the power supply to the dispenser and make sure that the device is completely off.
Drain the Water: Drain the water inside the dispenser completely. Drain the water completely using both the hot and cold water taps. You can also drain the remaining water with the help of the drain valve, which is usually located under the dispensers.
2. Cleaning the Exterior
Cleaning Cloth and Soapy Water: Wipe the exterior of the dispenser with a clean cloth and mild soapy water. Gently remove any water splashes, dirt and dust accumulations. Be careful not to use abrasive cleaners as this can damage the surface of the device.
Rinse: After cleaning the soapy water with a damp cloth, dry it with a dry cloth.
3. Cleaning the Interior and Water Tank
Water Tank: You can use the following mixtures to clean the water tank of an 80-liter water dispenser:
White Vinegar and Water Mixture: You can disinfect the tank by mixing 1 part white vinegar and 3 parts water. Vinegar is effective in killing bacteria and cleaning calcification.
Bicarbonate and Water Mixture: You can also prepare a cleaning solution by mixing 1 tablespoon of baking soda with 1 liter of water. This mixture helps eliminate bad odors.
Special Dispenser Cleaning Products: You can also buy dispenser cleaning chemicals from pharmacies or cleaning stores. However, read the instructions carefully when using these products.
Pour the Mixture Inside: Pour the mixture you prepared into the interior of the dispenser and wait for a few minutes. Run this mixture from the taps, so that the taps and waterways are also cleaned.
4. Cleaning the Faucets and Waterways
Cleaning the Faucets: The faucets of the water dispenser can cause bacteria and sediment accumulations with regular use. If you can remove the faucets, clean these parts with a vinegar or bicarbonate mixture.
Rinsing the Faucets: After cleaning, rinse the faucets thoroughly with plenty of water and put them back in place.
5. Checking the Filters (If Available)
If the dispenser has a water filter system, remember that the filters should be changed regularly. The lifespan of the filters usually varies between 6 months and 1 year, but you should check the manufacturer's recommendations.
Cleaning and Changing the Filter: If it is not possible to clean the filter, replacing it with a new one would be the best solution. Otherwise, the dirt and bacteria accumulated in the filter can negatively affect the quality of the water.
6. Descaling
Descaling Problem: If there is scaling in your dispenser, you need to descale it, especially in the hot water tank and heater section. The vinegar mixture can be used as a natural descaler.
Descaling Products: You can also use commercially available descaling products. Before using these products, read the user manual of the water dispenser and choose the products recommended by the manufacturer.
7. Rinsing
After cleaning the dispenser, it is important to rinse the water tank and taps several times with clean water. Thoroughly clean the inside of the dispenser by running the water through the taps to completely remove any traces of vinegar or other cleaning products.
Before operating the dispenser, make sure that it is completely clean and that all traces of chemicals or cleaners have been removed.
8. Prepare the Dispenser for Reuse
After all parts of the dispenser are dry, replace them.
Refill the water dispenser with water and reconnect the power. Wait a few minutes for the water to settle before operating the dispenser.
9. Regular Cleaning Tips
Cleaning the water dispenser once a month is ideal. If the water dispenser is used intensively, it will be beneficial to increase the frequency of cleaning.
Refresh the water in the dispenser regularly so that the water does not become stale. If it will not be used for a long time, it is best to drain the water from the dispenser and leave it dry.
By following these steps, you can clean the 80-liter water dispenser and get both a healthy water source and a long-lasting device.